Agfa Printer Instrukcja Użytkownika Pobierz pdf (Strona 22)

:ANAPURNA L/XL OPERATOR MANUAL

AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]22] 8/09/2006]

When purging with “Cleaning-Solution”, always work the in three steps.

To clean all 8 heads, first purge the 4 right heads (Lc, Lm, W1, W2), close them,

and in the second stage, purge the remaining 4 left heads (K, C, M, Y).

Finally, open the 4 right heads again, and purge all 8 heads together now.

By doing so, you’ll have the most optimal cleaning pressure.

CLEANING the failing heads:

- Set the valves of the failing heads to the “S” position.

- Set the Solution valve to “S”.

- Push the “Solution-Purge” button on the back of the carriage.

(Keep pushing until you see a CLEAR “Solution-Curtain”

under the heads, then stop pushing)

- Leave the heads in this condition for at least 5 minutes.

- Set the valves back to “I”.

- Set the Neg. Pressure to “0”, leave the system for 1 minute

(Ink will now start dripping out the heads)

- Restore the Neg. Pressure back to “-.034”

- Clean the heads with a fiber-free cloth.

- Check on “weeping” (**)

Solution Valve

Solution-Curtain

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

Komentarze do niniejszej Instrukcji

Brak uwag

Agfa Printer Instrukcja Użytkownika Strona 22

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Drukarki Agfa Printer